Report any bugs here and we'll post fixes
Moderators: Sascha Willems, Thomas
by Julio Jerez » Fri Sep 19, 2014 7:16 pm
Ok sync and try again, please let me know how that works.
this was a serious bug, basically the penetration reported by the low level collision was scale by the intake scale factor.
-
Julio Jerez
- Moderator
-
- Posts: 12249
- Joined: Sun Sep 14, 2003 2:18 pm
- Location: Los Angeles
-
by arkeon » Fri Sep 19, 2014 7:26 pm
Yes and I think this is related to my other problem on camera and exception on high speed. (I hope)
just the time to rebuild and I let you know.
-
arkeon
-
- Posts: 261
- Joined: Sat Sep 13, 2014 5:25 pm
by Julio Jerez » Fri Sep 19, 2014 7:39 pm
not this was not related to the high speed, this was related to collision only.
you are seeing more than other people because you use huge scale factors
most people use small scale factors on meshed, but you use factors of 50 and 100 and that
exposed a bug that was there since newton 3.00
this was not in newton 2.xx because collision is done in global space while newton 3.00 is in local space.
-
Julio Jerez
- Moderator
-
- Posts: 12249
- Joined: Sun Sep 14, 2003 2:18 pm
- Location: Los Angeles
-
by arkeon » Fri Sep 19, 2014 7:46 pm
ho ok.
So it works well now ^^ Well done
But yes the camera problem still there.
Anyway thanks a lot for your time.
-
arkeon
-
- Posts: 261
- Joined: Sat Sep 13, 2014 5:25 pm
by manny » Sat Sep 20, 2014 5:46 am
I consider this solved and thread is thereby locked
thanks
-
manny
- Site Admin
-
- Posts: 131
- Joined: Tue Feb 11, 2014 6:49 pm
Return to Bugs and Fixes
Who is online
Users browsing this forum: No registered users and 12 guests