Simulating Real Humanoid Robots

Share with us how are you using the powerrrr of the force

Moderator: Alain

Simulating Real Humanoid Robots

Postby Gianluca » Wed May 21, 2008 10:18 am

I'm involved into the I-TALK research project
http://italkproject.org/
where various partners around the world will use a humanoid robot developed in Genova (italy).
Of course, one of the task is to develop an accurate simulator for the robot... you know... to avoid to break it to often (one robot cost 250.000€ ) :shock:

I've just finish to port the structure into Newton :D please look at the pictures 8)

The robot is composed by 73 DOF :shock: actuated by 53 motors controlled by on-boards DSP.
The second image shown the 73 joints, each cyan cylinder represent the axis of rotation of joints and green lines represent their connections.

Of course, thank you to Julio ... because only with Newton this can be simulated :-)

Image

Image

Ciao,
Gianluca
Gianluca
 
Posts: 53
Joined: Fri Nov 11, 2005 4:37 am
Location: Rome - Italy

Postby Julio Jerez » Wed May 21, 2008 12:40 pm

I will just say "Un tin tin y un ti ntan" :D :shock: :)

the translation do no make sence.
Julio Jerez
Moderator
Moderator
 
Posts: 10954
Joined: Sun Sep 14, 2003 2:18 pm
Location: Los Angeles


Return to User Gallery

Who is online

Users browsing this forum: No registered users and 1 guest